JLG 40HA ANSI Parts Manual - Manual (Page 17)

3120673 1-9
S
E
C
T
I
O
N
1
F
R
A
M
E
SECTION 1 FRAME
FIGURE 1-2. FRAME, STEERING AND AXLE INSTALLATIONS - 2WD AND 4WD (WITH 4 WHEEL
STEER)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.
FRAME, STEERING AND AXLE INSTALLATIONS -
2WD AND 4WD (WITH 4 WHEEL STEER) Ref.
2360380 Frame (2WD Fixed Axle) 1
2360381 Frame (4WD Fixed Axle) 1
2360334 Frame (All With Oscillating Axle - Prior to October
1994) 1
2360385 Frame (All With Oscillating Axle - October 1994 to
Present) 1
0961029 Bushing, Bronze (Rear Axle) 4
FRONT AXLE INSTALLATION (STANDARD PARTS) Ref.
1 Not Used
2 Not Used
3 0641610 Bolt 3/8"-16NC x 1 1/4" A/R
4 4740185 Washer, Hardened A/R
5 0100019 Loctite #271 (Not Shown) A/R
6 Not Used
7 2160002 Fitting, Grease 1
8 Not Used
9 0641406 Bolt 1/4"-20NC x 3/4" 4
10 4761400 Lockwasher 1/4" 4
11 4843286 Pin (Oscillating Axle Only) 2
12 4842794 Pin (Oscillating Axle Only) 2
13 Not Used
14 4751400 Flatwasher 1/4" 4
15 4712600 Flatwasher 1" A/R
FRONT AXLE INSTALLATION - 2WD MACHINES
WITH FIXED AXLE (VARIABLE PARTS) Ref.
0253173 BUILT PRIOR TO OCTOBER 1994 Ref. —
0255075 BUILT OCTOBER 1994 TO PRESENT Ref. —
FRONT AXLE INSTALLATION - 2WD MACHINES
WITH OSCILLATING AXLE (VARIABLE PARTS) Ref.
0250382 BUILT PRIOR TO SEPTEMBER 1990 Ref. D
0251330 BUILT SEPTEMBER 1990 TO OCTOBER 1994 Ref. C
0255069 BUILT OCTOBER 1994 TO PRESENT Ref. —
51 Front Axle Weldment Options: 1
4843477 Prior to October 1994
4844848 October 1994 to Present
52 Lockout Cylinder Assembly Options (See Section 5
for Breakdown): 2
Not Required Fixed Axle
Oscillating Axle
1681785 Prior to September 1990
1682406 September 1990 to June 1992
1682757 June 1992 to October 1994