IKA C 5000 control Package 2/12 User Manual
Page 68
6\VWHP FDOLEUDWLRQ
IKA
-WERKE C 5000 control/duo-control Ver. 10 04.07
3DJH
cc
Open the
&DO
dialog box.
SdBE
e
b!X£!¥
2)
¡¨P8¡©G
Using the button
&DOF
in the
FDOLE
dialog box, carries out the acid correction for
the selected calibration. The calculation is dependent on the evaluation procedure
selected:
•
Evaluation procedure ASTM D1989, D240, D5865, D4809, D5468, E711
For calibration, a dialog reduced to the acid-correction fields and a shortened
results form are displayed. The comments in Section 11.2 under Point
}
apply
here too.
•
Evaluation procedure DIN/IKA
In the DIN/IKA evaluation procedure, the acid correction to ASTM D240 or
ASTM D1989 can also be used for calibration. The results form is shortened ac-
cordingly. The other calculation modes are not available for calibrations.
The calibration experiments are listed in the dialog box. The columns in the experi-
ment list have the following meanings:
1R
Running number of the calibration experiments
& YDOXH
The heat capacity of the calorimeter system determined with
the experiment in question
([SHULPHQW
The
VDPSOH QDPH
of the experiment in question
cd
Place the cursor on
6HO
with
7DE
and confirm with
2.
or press the
key. You
have now selected the test for calibration. The test is marked with ”
√
” on the display