IKA C 5000 control Package 2/12 - Manual (Page 64)

6\VWHP FDOLEUDWLRQ
IKA  -WERKE C 5000 control/duo-control Ver. 10 04.07
3DJH
i
Place the crucible in the crucible holder.
j
Attach cotton thread
The decomposition vessel is fitted with a permanent ignition wire. In order to initiate
the combustion process, a cotton thread must be attached to the ignition wire. At-
tach the cotton thread as shown in the illustration.
Align the cotton thread with a pair of tweezers so that it is suspended into the cruci-
ble and touches the sample. This will ensure that the burning thread will ignite the
sample during the ignition process.
k
Close the decomposition vessel (C 5010 or C 5012).
Place the cover onto the lower section and push down until it presses against the
stop piece in the lower section.
C 5010 C 5012
Place the union nut onto the lower section and tighten by hand.
C 5010 C 5012
The decomposition vessel can now be filled.
7 ) ¥ ¨¦§¤¥ §©¨4%9(¡© @¡¦§'%¤3 2£