Snorkel MHP17 - Manual (Page 64)

Inspection and Maintenance Table, 7-1
L
Left side view of machine, 3-6
Light Flashing, 7-5
Lower control box, 7-6
M
Maintenance personnel
see Introduction - page iii
Minimum Safe Approach Distance
see Electrical Hazard - page ii
N
Nomenclature And Serial Numbers, 3-5
O
Operating Procedures, 8-1
Control Stations, 8-1
Emergency Stopping, 8-1
Moving The Platform, 8-3
Starting From Ground Control Box, 8-2
Starting From Platform Control Box, 8-3
Operation, 8-1
Operators
Qualified, 7-1, 8-2
Other Safety Devices, 2-1
Overall Dimensions MHP16/47, 3-3
P
Placards and decals
Inspection drawing, 7-8
Platform
Foot switch, 8-5
Gravity gate, 7-5
Guardrails, 7-5
Lanyard anchor points, 7-5
Platform Control Box Controls, 6-5
Pre-start Inspection, 1-1
Q
Qualified operators
see Introduction - page iii
R
RCD/ELCB Outlet (option), 5-1
Responsibilities of owners and users
see Introduction - page iv
Right side view of machine, 3-5
S
Safe Operation, 1-1
Safety Decals and Placards, 1-3
Location illustration, 1-4
Safety Devices
Bubble level, 2-2
Emergency Stop Switches, 2-1
Flashing light, 2-3
Foot switch, 2-2
Gravity gate, 2-2
Guardrails, 2-2
Lanyard anchor points, 2-1
Lift enable light, 2-3
RCD/ELCB AC outlet, 2-3
Safety Device Information, 2-1
Safety precautions
Fuel Handling Precautions, 1-3
Mounting and Dismounting Precautions, 1-2
Operating Precautions, 1-2
Operator, 1-2
Operator Maintenance Precautions, 1-3
Personnel Precautions, 1-2
Starting and Stopping Precautions, 1-2
Sandblast protection kit, 8-1
Securing for Day, 8-5
Signs, Caution, Danger, Notes
see Introduction - page iii
Specifications
Boom control, 3-1
C.E. Approval number, 3-1
Gradeability, 3-1
Horizontal outreach, 3-1
Insulation rating, 3-1
Kerb weight, 3-1
Lower, 3-1
Maximum towing speed, 3-1
Outrigger width, 3-1
Platform capacity, 3-1
Platform height, 3-1
Platform rotation, 3-1
Platform size, 3-1
Power in basket, 3-1
Power source, 3-1
Slew 400 degrees, 3-1
Standard colour, 3-1
Trailer tongue weight, 3-1
Transit height, 3-1
Transit length, 3-1
Transit width, 3-1
Turntable rotation, 3-1
Working height, 3-1
index 2 MHP16/47 – 11544A
Index