Safety devices, Safety device information 2-1, Emergency stop switches 2-1 – Snorkel MHP17 User Manual
Page 17: At ground control box 2-1, At platform control box 2-1, Other safety devices 2-1, Lanyard anchor points 2-1, Other safety devices, 2-1, Emergency stop switches, 2-1, Lanyard anchor points, 2-1
2. Safety Devices
■ Safety Device Information
For emer gency op er a tion con trols and pro ce dures,
see the “Emer gency Op er a tion” chap ter 9, in this
man ual.
The de vices listed in this chap ter are safety de -
vices.
They are on the MHP16/47 to in crease safety in the
work place for both the op er a tor and other peo ple
near the MHP16/47.
DO NOT by pass, disable, modify, or ignore
any of these devices. Check them carefully
at the start of each work shift to see that they
are in working order (see “Daily Inspection
and Maintenance” chapter 7). If any is found
to be defective, remove the MHP16/47 from
service immediately until a qualified service
technician can make repairs.
■ Emergency Stop Switches
❑
At ground control box
Figure 2.1 - Emergency Stop Switch, Ground
Control Box
Press the EMERGENCY STOP switch cover
down, at any time, un der any con di tions and the
en
tire ma
chine stops, and noth
ing moves. This
emer gency stop switch cover must be up and the
switch turned on for any thing on the MHP16/47 to
work.
❑
At platform control box
Figure 2.2 - Emergency Stop Switch, Platform
Control Box
Press the EMERGENCY STOP switch cover
down, at any time, un der any con di tions and the
en
tire ma
chine stops, and noth
ing moves. This
emer gency stop switch cover must be up and the
switch turned on for any thing on the MHP16/47 to
work.
NOTE
The ground control box is designed to override
the platform control box. If the platform control
box EMERGENCY STOP switch is down (off) the
ground con trol box can still be used to start and
op er ate the MHP16/47.
■ Other Safety Devices
❑
Lanyard anchor points
Figure 2.3 - Lanyard Anchor Points
MHP16/47 – 11544A
page 2 - 1
CAUTION