Snorkel MHP17 - Manual (Page 13)

MHP16/47 – 11544A page 1 - 5
1. Safety
YOU MUST NOT OPERATE THIS DEVICE UNLESS:
AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO
DEATH OR SERIOUS INJURY.
0323897
1.
2.
YOU HAVE BEEN TRAINED IN THE SAFE OPERATION OF THIS
DEVICE AND
HHHH
YOU KNOW AND FOLLOW THE SAFETY AND OPERATING
RECOMMENDATIONS CONTAINED IN THE MANUFACTURER'S
MANUALS, YOUR EMPLOYER'S WORK RULES, AND APPLI-
CABLE GOVERNMENTAL REGULATIONS.
HHHHHHHH
DANGER
DANGER
ELECTROCUTION
HAZARD
THIS MACHINE IS NOT
ELECTRICALLY INSULATED.
0323899
Death or serious injury can result from
contact or inadequate clearance to
electrical power lines and apparatus.
Maintain 10 feet minimum clearance
from electrical power lines and
apparatus.
Allow for sway, rock, and sag.
ROTATE
LOWER
SPEED CONTROL
SLEW
11543 - 1
LIFT
ENABLE
CHOKE
EMERGENCY
PLATFORM
EMERGENCY LOWER
TO LOWER PLATFORM, OPERATE EMERGENCY
LOWER SWITCH .
1.
2. TO SLEW BOOM, OPERATE EMERGENCY
LOWER SWITCH AND SLEW SWITCH
TOGETHER .
RAISE /
LOWER
EXTEND /
RETRACT
LEVEL
PLATFORM
CAUTION
SAFETY BELTS WITH
SHOULDER STRAPS OR
SAFETY HARNESS ARE
TO BE USED
9928
215 KG
2025-215 E
WARNING
KEEP LINES CLEAR POWER OF
Unless the Electrical Supply Authority has advised
in writing otherwise;
the clearance between any live overhead
power line and any part of this machine or
load carried is required by law to be
AT LEAST 4 METRES
This is a requirement of regulation 93 of the
Electrical Supply Regulations 1984
in the interests of safe working.
DANGER
BEWARE OF ELECTRICAL HAZARDS
REGULATION 133A OF THE
CONSTRUCTION SAFETY ACT 1912 REQUIRES
(a) Minimum approach of an appliance
(b) Inspection of the work site for
(c) Constant vigilance and an observer required
to live electrical apparatus.
electrical hazards before
commencing to use the appliance.
whilst working or travelling the appliance
in the vicinity of live electrical apparatus.
3m. for voltages up to 132,000
6m. for voltages above 132,000
and up to 330,000
8m. for voltages above 330,000
NEW ZEALAND ONLY
AUSTRALIA ONLY