Caution, ዓ - ዐ . threading the bobbin case – Brother HE-800A User Manual
Page 68
HE-800A
7. CORRECT USE
60
ዓ-ዐ. Threading the bobbin case
CAUTION
Turn off the power switch before removing or inserting the bobbin case, otherwise the machine may operate if
the treadle is depressed by mistake, which could result in injury.
1. Insert the bobbin into the bobbin case as shown in the illustration.
Note: If the bobbin is inserted back to front, the bobbin will spin freely and the work clamp pulse motor will get out of
step.
2. Pass the thread though the slot (1) and then under the tension spring (2) and through the slot (3).
3. When sewing whip stitches, pull approximately 40 mm of thread out from the thread hole (4), and when sewing purl
stitches, pull approximately 40 mm of thread out from thread hole (5).
2812Q
Purl stitch
(seal stitch)
Whip stitch
(plain stitch)
- XL 2600i (82 pages)
- PE-770 (88 pages)
- PE-770 (40 pages)
- PE-770 (2 pages)
- SE-400 (16 pages)
- LS-2125i (2 pages)
- LS-2125i (67 pages)
- CS-6000i (68 pages)
- CS-6000i (2 pages)
- CE-5000PRW (68 pages)
- LX-3125 (96 pages)
- SE-400 (24 pages)
- 3034D (2 pages)
- 3034D (76 pages)
- HE 120 (183 pages)
- Innov-IS 500D (12 pages)
- CS 80 (115 pages)
- CS-8060 (116 pages)
- NX-400 (153 pages)
- PC-420 (153 pages)
- NX-200 (111 pages)
- PC-210 210PRW (2 pages)
- PC-210 210PRW (111 pages)
- Innov-IS 4000D (8 pages)
- Boutique 27 37 (111 pages)
- 2340CV (40 pages)
- 2340CV (21 pages)
- DS-120 (100 pages)
- PE-700II 750DUSB (40 pages)
- NX-2000 (88 pages)
- NX-2000 (2 pages)
- Innov-is 2200 (48 pages)
- NX-2000 (40 pages)
- 885-X08 (104 pages)
- PR-600 600C (20 pages)
- INNOVIS 500 (8 pages)
- PS-21 (46 pages)
- PC 6500 (140 pages)
- PE-750D (40 pages)
- XL-6061 (101 pages)
- XL-5051 (45 pages)
- BAS-326F-0 (81 pages)
- CS 100T (67 pages)
- EX 660 (67 pages)
- XL-5010 5020 5030 (82 pages)