Brother HE-800A - Manual (Page 61)

HE-800A
5. OPERATION
53
ዑ-ውው. Bobbin thread counter
If you use the bobbin thread counter to set the number of articles which can be sewn with the amount of bobbin thread
available, you can stop the bobbin thread running out in the middle of sewing a pattern.
Check that panel DIP switch A - No.4 is at the ON setting. (Refer to “13. CHANGING FUNCTIONS USING THE DIP
SWITCHES”.)
1. Press the SELECT key (1) to change the mode to
automatic mode.
2. Press the parameter keys (2) and (3)
simultaneously.
* "bC" will flash in the program number LED (4), and
the bobbin thread counter value will appear in the
parameter display LED (5).
3. Press the RESET key (6).
* The previously-set bobbin thread counter value will
appear in the parameter display LED (5).
4. Press the parameter keys (2) and (3) to change the
bobbin thread counter setting.
* The bobbin thread counter setting will flash while
the setting is being changed.
5. Press the ENTER key (7). The bobbin thread
counter value will be accepted and the mode will
return to automatic mode.
6. When the number of articles set by the bobbin thread counter have all been sewn, the previously-set bobbin thread
counter value will appear in the parameter display LED (5), and an alarm will start sounding continuously.
* The sewing machine will not operate during this time, even if the treadle is depressed.
7. Replace the bobbin, and then press the ENTER key (7).
* The alarm will stop sounding, the parameter display LED (5) will stop flashing and light steadily, and normal sewing
can then be carried out.
* If you press parameter keys (2) and (3) at this time, you can change the setting value for the bobbin thread counter.
Press the ENTER key (7) to accept the setting.
ዑ-ውዎ. Using the program memos
Insert the program memos (1) into the rear of the
operation panel (2) for safekeeping.
Program memo contents
1) Easy reference guide
2) Error code table
3) Parameter table
4) Program notes
Use a lead pencil to make any additions to the
parameter table and for writing anything into the
program notes. If you do so, additions can be removed
using an eraser and the space can be re-used.
The program notes are useful for recording what
patterns have been entered into which programs.
3942Q
3943Q