beautypg.com

Apple Xserve (Early 2008) DIY Procedure for Enclosure User Manual

Page 91

background image

Xserve (Late 2006/Early 2008) Power Distribution Board Replacement Instructions

9

Power Distribution Board

Locate the power distribution board.

1.

Release the thumbscrew that secures the power distribution board to the enclosure.

2.

Note: The thumbscrew is captive; you cannot remove it.

Pull the board toward the side of the enclosure in the direction shown, to disconnect it from

3.

its connector on the logic board.

Lift up the board and remove it from the enclosure.

4.