beautypg.com

Apple Xserve (Early 2008) DIY Procedure for Enclosure User Manual

Page 89

background image

Xserve (Late 2006/Early 2008) Power Distribution Board Replacement Instructions

7

Drive Interconnect Backplane

Release the two locking levers on the front panel board cable connector and disconnect the

1.

cable from the front panel board. Move the front panel board cable out of the way.

Disconnect the backplane-to-logic board I/O cable from the backplane.

2.

Release the thumbscrew that secures the backplane to the enclosure.

3.

Note: The thumbscrew is captive; you cannot remove it.