beautypg.com

Apple Xserve (Early 2008) DIY Procedure for Enclosure User Manual

Page 90

background image

Xserve (Late 2006/Early 2008) Power Distribution Board Replacement Instructions

8

Shift the backplane to the left (towards the enclosure side), in the direction of the arrow

4.

shown, until it clears the four mushroom-shaped standoffs that hold the backplane in place.

Rotate the backplane up slightly from the logic board side (as shown), and carefully pull the

5.

backplane up and toward the logic board to free it from the standoffs and four backplane
alignment slots in the enclosure. Be careful not to let any backplane components come into
contact with the standoffs or the enclosure as you remove the backplane.

See also other documents in the category Apple Software: