Apple Xsan 1.1 - Manual (Page 43)

Chapter 2 Setting Up a Storage Area Network 43
Step 11: Add LUNs (RAID Arrays) to Storage Pools
The final step in preparing storage for the SAN is assigning LUNs to the storage pools in
your SAN volumes:
1 Select a storage pool on the Storage pane and click Available LUNs.
A drawer opens with a list of all the LUNs you initialized on page 39.
2 Drag LUNs from the drawer to the storage pool.
If a new LUN is not the same size as LUNs already in the storage pool, the usable size is
shown next to the LUN in the list.
3 Click Save.
Click to open
a drawer of
unused LUNs.