Apple Xsan 1.1 - Manual (Page 38)

38 Chapter 2 Setting Up a Storage Area Network
5 If the computer is a controller, choose its failover priority.
Choose High for the primary controller or the only controller in the SAN. Choose
Medium or Low for standby controllers.
6 If this computer is a controller, choose the network interface it will use for metadata
communications with other clients and controllers from the “Access the SAN via” pop-
up menu.
7 Type an Xsan software serial number.
You can find the serial number for a single copy of Xsan on the Xsan installer disc
sleeve. If you purchased a site-licensed serial number, look on the documentation you
received when you purchased the license.
8 If you’re using a site-licensed serial number, type the registered license holder and
organization in the “Registered to” and Organization fields. Be sure to type these
exactly as they were provided when you purchased the license.
9 Click OK, then repeat these steps for other computers in the list.
10 When you’re through, click Save.