AEM 30-1913 Universal Fuel Ignition Controller 6 Channel - Manual (Page 4)

Page 4
CR
K MAG
I -
FIC
SENSOR
+
-
CR
K MAG
I +
CR
K MAG
O +
ECU
Figure 4: Crank Mag connection
Does your vehicle have one or two Cam Sensor(s)?
If your vehicle has one Cam Sensor, the two
“Cam 2” Hall wires and four “Cam 2”
Mag wires may be eliminated.
Does your vehicle have a Mag or Hall style Cam Sensor?
As with the Crank Sensor, a vehicle will have one or the other, not both. Either
the “Cam 1” Hall or the Cam 1 Mag wires can be eliminated. Connect the Cam Sensor
appropriately as shown in Figure 5 or 6.
CAM1
HAL
I +
FIC
SENSOR
SIGNAL
GND
VREF
CAM1
HAL
O +
ECU
Figure 5: Cam 1 Hall connection