SkyTrak 6042 Operation Manual - Manual (Page 75)

Operation
73 Model 6042 Origin 5/02
4. Maximum Fork Sweep
(Figure 49)
Figure 49
Leveling Frame
When placing a load while on a slope, use the frame sway control to keep
the vehicle level. The operator should observe the frame level indicator to
assure that the vehicle is level at all times.
CAUTION:
Allow for adequate clearance between the
attachment and other objects when turning.
The attachment (Figure 49, 1) extends beyond the end of the vehi-
cle. The operator must be aware of the maximum sweep (2) of the
attachment when turning in order to avoid hitting personnel and
other objects in the area.
DANGER:
Use of the frame sway control with the boom
raised above horizontal can cause tipover resulting in death or
serious personal injury. Always use the frame sway control to level
the vehicle before raising the boom above horizontal. If the vehicle
cannot be leveled using the frame sway control, reposition the
vehicle.
OH1690
1
2