SkyTrak 6042 Operation Manual - Manual (Page 176)

174 Model 6042 Origin 5/02
Test Procedures
If the vehicle does not drive “straight,” the steering could be out-of-phase.
Perform the following Four Wheel Steer Indexing Procedure to synchronize
the front and rear steering.
1. With the steering select switch (Figure 114, 1) in the Four Wheel
Steer position (2), turn the steering wheel full left.
2. While holding the steering wheel full left, toggle the steer select
switch to the Front Wheel Steer position (Figure 114, 3) and steer
the front wheels back to center.
3. Toggle the steer select switch back to Four Wheel Steer position
(Figure 114, 2) and turn the steering wheel full left.
4. Toggle the steer select switch back to Front Wheel Steer position
(Figure 114, 3) and steer the front wheels full left.
5. Toggle the switch to the Four Wheel Steer position (Figure 114, 2)
and return to center.
The vehicle should now be properly indexed in Four Wheel Steering. If the
wheels are still out-of-phase, repeat the above procedure.
Figure 114
Four Wheel Steer Indexing Procedure
OH3200
3
2
1