SkyTrak 6042 Operation Manual - Manual (Page 46)

44 Model 6042 Origin 5/02
Operation
Worklight Switch (Front, Rear & Boom Worklights)
(Figure 27)
This three position rocker switch (Figure 27, 1) controls the front, rear and
boom worklights. The switch (1) is located in the upper switch bank on the
right side dash panel. These lights will only operate when the ignition switch
is in the RUN position.
• Push the top of the switch in to turn all the
worklights OFF.
• To turn the front and boom worklight ON,
position the rocker switch to the center
position.
• Push the bottom of the switch in to turn all the
worklights ON.
Figure 27
OH2570
OH2591
OH2611
OH2601
OH1852
1