SkyTrak 6042 Operation Manual - Manual (Page 43)

Operation
41 Model 6042 Origin 5/02
Frame Level Indicator
(Figure 23)
The indicator (Figure 23, 1) is mounted on the top inside of the Operator's
Protective Structure (cab). This is a bubble type indicator which allows the
operator to tell if the vehicle has been positioned in a level condition. Always
frame sway the vehicle either right or left until the indicator reads zero
degrees (0° ). If zero cannot be achieved, then reposition the vehicle until it
is level before placing the load.
NOTE: Maximum frame sway is 10° in either direction.
Figure 23
Boom Angle Indicator
(Figure 24)
The boom angle indicator is a plumb arrow (Figure 24, 1) with angular
graduations (2) from minus 10° to plus 80° . It is located on the left side of
the boom and is visible from the operator’s position. Use this indicator to
determine the boom angle when reading the capacity chart (see “Using The
Capacity Chart”).
Figure 24
OS0232
1
4105262
OH0302
1
2