Defi Link Meter - Manual (Page 41)

94
（C）Defi-Link Indicator
1. Attach double-sided tape on the bottom of
the indicator. (Use two sheets of double-
sided tape for a 80mm or 115mm meter.)
2. Connect the indicator wire to the body of the
indicator. (Use one of two wires that matches
your desirable installation.)
3. Attach the indicator to a meter or the
instrument panel.
・In the case of the use as a master warning indicator.
・In the case of the use as an indicator for each meter
＊When installing and using the Defi-Link Indicator Ⅱ, please refer to its
operation manual.
1. Connect the indicator to M-WARNING
connector by using an attached wire.
2. Attach the indicator to a meter or the
instrument panel.
"Master Warning" is an indicator which lights
up as a warning signal for all the connected
meters except tachometer.
(Tachometer warning is included in Master
Warning of DF05001.)
Control Unit Ⅱ