Defi Link Meter - Manual (Page 27)

80
white color
black color
orange color
red color
unused
yellow color
black color
white color
orange color
orange color
white color
black color
yellow color
● INSTALLATION DIAGRAM(for installation personnel)
Installation diagram
Meter
Meter holder
Meter wire
Control Unit Ⅱ（rear view）
＊DF05001:
black
Power supply wire
Huse 4A
Red : Battery
(To 12V battery wire)
Orange : IGN
(To 12V wire when
ignition on)
White : Illumination
(To 12V wire when small
lamp is on)
Black : GND
(To ground, negative
battery terminal)
●Please read the safety warnings thoroughly for the installation and handling. Improper
installation or operation could cause the product to fall and damage the vehicle.
Control Unit Ⅱ
Sensor wire connections
position
CAUTION
M-WARNING （white）
TACHOMETER （white）
WATER TEMP. （blue）
EXHAUST TEMP.（black）
OIL TEMP. （white）
FUEL PRESS. （blue）
OIL PRESS. （black）
（white）
DC SOURCE （white）
METER OUTPUT1（white）
METER OUTPUT2（white＊）
●Insert the wire that matches the wire connections position indicated on the side of
the control unit.
The unit will not function with incorrect connections.
●Pull out each connector with pressing the lock of the connector firmly.
●Put the connector of INTAKE MANIFOLD PRESS’s sensor wire in TURBO
connector(white) of Control Unit Ⅱ.
WARNING
TURBO(BOOST)/
INTAKE MANIFOLD PRESS.
Defi-Link
Meter
Defi-Link
Meter BF
6．HOW TO INSTALL(for installation personnel)