A. main power switch and connectors, B. flat bed attachment with accessory compartment – Brother PC 8500 User Manual
Page 9
(Programmed
6
2
1
3
4
2
A
1
0
9
8
7
6
5
4
3
2
1
1
J
I
II
III
A. MAIN POWER SWITCH AND CONNECTORS
1
Card slot
Slot for memory card insertion.
2
Main power switch
Use to turn on/off the main power.
3
Controller jack
Insert for foot controller operation.
4
Power cord
Use to connect machine to power supply.
CAUTION
–
When leaving the machine unattended, the
main switch of the machine must be
switched off or the plug must be removed
from the socket-outlet.
–
When servicing the machine, or when
removing covers or changing bulbs, the
machine or the electrical set must be
unplugged.
–
For U.S.A. only
This appliance has a polarized plug (one
blade wider than the other). To reduce the
risk of electric shock, this plug is intended
to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install the
proper outlet. Do not modify the plug in
any way.
B. FLAT BED ATTACHMENT WITH
ACCESSORY COMPARTMENT
I
Tilt the lid of the accessory compartment
toward you to open.
II
Each presser foot has a symbol.
1
Presser foot symbol
III
ACCESSORY LIST
The location of each accessory is shown in figure
III
.
1
Buttonhole foot “A”
X57789-101
2
Embroidery foot “Q”
XA5891-101
3
Overcasting foot “G”
X51162-001
4
Monogramming foot “N”
X53840-301
5
Zipper foot “I”
X59370-051
6
Zigzag foot “J”
137748-101
7
Blind stitch foot “R”
X56409-001
8
Seam ripper
X54243-001
9
Button fitting foot “M”
130489-001
0
Bobbin
136492-101
A
Needle set
X58358-001
No.
Part Name
Part Code
*
Always use the plastic bobbin which is supplied
with machine or in accessory compartment.
*
Always use BROTHER accessories recommended
for this machine.