When changing frame pattern and patterns size – Brother PC 8500 User Manual
Page 131
128
(Programmed
1. Touch the “SIZE” key.
2. To increase the pattern size, touch the “
” key; to
reduce the size, touch the “
” key to reset the size
touch the “
” key.
The size will change each time one of these keys is
pressed.
*
The maximum frame pattern size is different for each
pattern.
*
Some frame patterns can be enlarged further if they are
rotated 90°.
3. After adjustment is competed, touch the “END SIZE
CHANGE” key.
CAUTION
After the size of a character, frame patterns or embroidery
patterns have been changed, check the display to see
which embroidery frames can be used. If an embroidery
frame which is not displayed is used, the embroidery foot
may touch the frame, or injury may result.
*
There are some patterns that cannot be enlarged or
reduced.
*
Use the standard needle size if the thread breaks or splits
when using reduced patterns change to a finer needle.
*
Use the standard embroidery thread weight, if gaps become
obvious when using enlarged patterns change to a heavier
weight thread.
[When changing frame pattern and patterns size]