The position for embroidering the pattern can be changed by
touching the “LAYOUT” key. This is useful if you want to
embroider a pattern at a location such as in the corner of the
fabric or if you want to align a pattern away from the center of
the embroidery area of the frame.

Touch the “LAYOUT” key. The layout screen will be displayed.

Touch these keys to move the embroidering position within
the embroidery area.

If you touch this key, the embroidering position will be
returned to the center of the embroidery area.

This moves the needle position to the middle of the pattern
or to the sewing start position, etc. Use it when you would
like to set the embroidering position.

If you touch this key, the embroidery frame will move so that
you can check the embroidering position.

If you touch this key, the pattern image will be displayed.

If you touch this key, the pattern will be reversed
horizontally. This function cannot be used with some
patterns.

Touch this key to rotate the selected pattern in 90˚ steps.

If you touch this key, the display will change from the layout
screen back to the original screen.

This displays the different types of embroidery frames that
can be used. (The frames that can be used will be shown in
solid color, and the frames that cannot be used will be
grayed out.)

CAUTION
Do not use any embroidery frames other than those shown
here, otherwise injury could result.

This shows the distance from the center when the
embroidering position has been moved.

Indicates the current pattern size.

If a character has been selected, this shows details about
the character.

If you touch this key changing the size of pattern. (Refer to
page 129)

1
2