When the automatic thread cutting is set, the machine trims
both threads automatically after sewing is completed, and
the machine will move on to the next sewing position before
stopping.

When sewing continuous patterns, press the
“START/STOP” button to stop the machine, and then press
the “REVERSE STITCH” button to sew a reinforcement
stitch.

5. When sewing is completed, trim any excess thread.

CAUTION
When sewing some patterns, the needle will stop in the
raised position while the fabric is fed due to the needle bar
separation mechanism which is used in this machine. At
such times, a clicking sound which is different from the
sound generated during sewing will be heard, but this
sound is normal and is not the sign of a malfunction.