Selecting one-point patterns – Brother PC 8500 User Manual
Page 114
1. Touch the “
” key.
The one-point pattern selection screen will be
displayed.
*
If another screen is being displayed, touch the
“EMBROIDERY” key before touching the one-
point pattern key.
2. Select the desired pattern.
The sewing screen will be displayed.
*
If you touch the “
” key, the next sewing
screen will be displayed.
If you touch the “
” key, the previous
sewing screen will be displayed.
*
If you touch the “RETURN” key, the pattern
selection screen will be displayed.
1
The selected pattern will be displayed.
2
This indicates the order of color changes. The
color displayed below each pattern is for
reference only. For details about the color
change table, refer to page 191.
3
Touch this key to move the sewing position.
(Refer to page 123.)
4
Touch this key if the thread breaks during
sewing or if you would like to sew again from
the beginning. (Refer to page 129.)
5
Touch this key to return to the previous
screen (pattern selection screen).
6
This shows the amount of time required to
embroider the pattern and the total amount of
time remaining. It does not include the time
needed to change colors.
(The totals are calculated and displayed after
a pattern is selected.)
7
This shows the size of the pattern.
Selecting one-point patterns
1
2
3
4
5
6
7
111
(Programmed