Sewing, Trial sewing, Sewing by using “utility stitch – Brother PC 8500 User Manual
Page 39: Sewing chapter 2
36
(Programmed
Sewing
1. SEWING
CHAPTER 2
TRIAL SEWING
Sewing by using “UTILITY STITCH”
6
6*
5
4
1
3
2
CAUTION
–
Be aware of the needle at all
times while sewing, and keep
your hands away from all
moving parts such as the
needle, balance wheel and
thread take-up lever, otherwise
injury may result.
–
Do not pull or push the fabric
too hard while sewing, otherwise
injury may result.
–
Never use bent needles. Such
needles can easily break, which
could result in injury.
A 75/11 needle is inserted into the machine at the factory.
1. When the machine is turned on, the straight stitch (left) is
always selected.
1
Replace with the presser foot with the letter indicated.
2
This indicates the pattern being selected.
3
If you touch this key before sewing, reverse stitches
(reinforcement stitches) will be sewn automatically. (Refer to
page 38.)
4
If you touch this key before sewing, the thread will be
automatically cut at the finish of sewing. (Refer to page 39.)
5
An advice screen will appear if you touch this key while
sewing. (Refer to page 42.)
6
This selects the appropriate pattern for the sewing
application and also displays the operation steps. (Refer to
page 40.)
7
Touch this key to return to the previous page.
8
Touch this key to move to the next page.
9
Touch these keys to adjust the stitch width setting.
0
Touch these keys to adjust the stitch length setting.
A
Touch these keys to change the thread tension.
9
0
A
1
2
3 4
5
6
7
8