Brother BE-1201B-AC-PC - Manual (Page 189)

BE-0901E-AC-PC• BE-1201B-AC-PC 7-7
Chapter 7 Operation of Machine
6. Hoop Feed Position
• In order to ease mounting and dismounting of the embroidery hoop, another needle position can be
set as a hoop feed position in the movable area additionally to the current needle position.
Refer to " Hoop Feed Position " on Page 6-28 for details.
• In order to ease material attachment while operation is suspended, the hoop can be moved to the
feed position at any time by the hoop feed switch.
• The hoop can also be moved to the feed position automatically after embroidering is finished.
Refer to "Automatic Hoop Feed" on Page 6-34 for details.
1. Press .