beautypg.com

Brother BE-1201B-AC-PC User Manual

Page 124

background image

6-4

BE-0901E-AC-PC• BE-1201B-AC-PC

Chapter 6 Embroidering

Settings menu

Needle

Uses the same needle bar for all embroidering. (

→ page 6-25)

Same Speed Range

Sets the head. (

→ page 6-26)

Pause

Sets whether to stop the needle bars temporarily when changing all the
needle bars. (

→ page 6-26)

Speed Range

Defines the speed range. (

→ page 6-27)

Hoop Feed Position

Sets the hoop feed position. (

→ page 6-28)

Embroidery Area

Sets the area for embroidering. (

→ page 6-29)

Embroidery Hoop

Sets the type of embroidery hoop. (

→ page 6-29)

Thread Trimming

Sets the inching and thread removal amount. (

→ page 6-31)

Boring

Uses No. 1 needle bar to perform boring. (

→ page 6-32)

Thread Breakage Sensor

Sets operation of thread breakage sensor. (

→ page 6-33)

Automatic Step Back

Sets automatic step back count for thread breakage. (

→ page 6-34)

Automatic Hoop Feed

Feeds hoop to the hoop feed position automatically after embroidering.
(

→ page 6-34)

End of embroidery

Sets if the machine returns to the start point after end of embroidery.
(

→ page 6-35)

Mending

Sets automatic error cancellation upon thread breakage. (

→ page 6-36)

Adjust

Sets the adjusting value. (

→ page 6-37)

Driving shaft

Set the startup speed of the main shaft. (

→ page 6-38)

Activate escape with pause

Sets whether to feed the hoop during temporary stop of the needle bars
to change colors. (

→ page 6-38)

Short stitch speed reduction

Reduces speed when stitching in a designated small pitch. (

→ page 6-

39)

Thin / Thick material

Adjusts the timing of needle drop and hoop movement. (

→ page 6-40)

Area trace

Select the outside shape of area tracing before starting sewing.
(

→ page 6-41)

Default Settings

Resets changes of the machine setting to the default at the factory
shipment. (

→ page 6-42)

Show Setting

Shows the contents of settings. (

→ page 6-43)

Load Setting

Loads the setting details. (

→ page 6-45)

Save Setting

Saves the changed setting. (

→ page 6-46)

Load Hoop

Selects the hoop type. (

→ page 6-47)

Window menu

Cascade

Cascades windows. (

→ page 6-20)

Tile

Tiles windows. (

→ page 6-20)

Arrange Icons

Align icons. (

→ page 6-22)

This manual is related to the following products: