Brother BE-1201B-AC-PC User Manual
Page 134
6-14
BE-0901E-AC-PC• BE-1201B-AC-PC
Chapter 6 Embroidering
Changing display colors
!
The color of needle bar changes to the actual color.
!
Changing the thread spool also changes the display color. A confirmation screen to save appears
before exiting from embroidering or retrieving other data.
!
A display color can be selected from among the following four items.
Basic color which can be selected screen on the "Color
selection"
Refer to steps 1 and 2.
Color sample supplied by a manufacturer
Refer to steps 1 and 3.
Color sample created by a user
Refer to steps 1 and 3.
Adjustment of an intermediate color from the color
sample supplied by a manufacturer or naming and
registration of a newly created color
Refer to steps 1 to 7.
!
The following screen is displayed when colors to be displayed are set to 256 in [Display properties]
and the color sample supplied by a manufacturer cannot be selected or an intermediate color
cannot be created.
W1017Q
1. Double-click the thread spool or needle bar number.
W1082Q