Brother BE-1201B-AC-PC - Manual (Page 162)

6-42 BE-0901E-AC-PC• BE-1201B-AC-PC
Chapter 6 Embroidering
Default Settings
Resets changes of the machine setting to the default.
! Items for setting and initialization are as follows:
Speed Range Automatically selects the value suitable for the hoop type.
Hoop Feed Position Returns to the machine home position.
Embroidering Area Sets the size each for the selected hoop.
Thread Trimming Inching motion
Thread removal feed length
Thread remaining amount Yes
15 mm (0.6 inch)
4
Thread Breakage Sensor All sensors are on.
Sensitivity
10
Automatic Step Back 0
Thread Breakage
Sensor Sensitivity Not affected by the thread breakage sensor sensitivity
Automatic Feed Hoop No
Return to the start point Yes
Mending Automatically rest breakage error No
Adjustment 0.0 mm for X direction
0.0 mm for Y direction
Main shaft speed up setting Activating speed up of driving shaft No
Hoop feed during temporary
stop No
Reducing speed in a small
pitch No
Thin
Feed speed
1
Thin / Thick material
Jog moving power up No
Area Trace "4 corner" is selected.