beautypg.com

Area check, 1 external tracing, 2 automatic hoop movement in area – Brother BE-1201B-AC-PC User Manual

Page 188

background image

7-6

BE-0901E-AC-PC• BE-1201B-AC-PC

Chapter 7 Operation of Machine

5. Area Check

5-1 External Tracing

W1278Q

If

is pressed in other cases than "area over", the rectangular outline of the pattern is traced.

5-2 Automatic Hoop Movement in Area

W1279Q

• If "area over" is displayed, press

. The hoop automatically moves inside the embroidering

area, where the pattern is set, at the nearest position.

• After finishing the movement inside the area by this function, execute external tracing. Then,

check that the needle and the presser foot do not interfere with the hoop before starting

embroidering.

• If the pattern is not held in the embroidering area as shown below, the hoop cannot move into the

area. To enlarge the embroidering area, refer to Page 6-29 “Enbloidery Area”.

W1281Q

Embroidering

star position

Embroidering area

0.1 mm

0.1 mm

(Example)

Embroidering area

This manual is related to the following products: