Brother BE-1201B-AC-PC - Manual (Page 148)

6-28 BE-0901E-AC-PC• BE-1201B-AC-PC
Chapter 6 Embroidering
Hoop Feed Position
Set the basic position of the hoop (hoop feed position) for cancellation of embroidering.
! The hoop feed position can be set only in the embroidering area surrounded by a red frame.
! The hoop feed position can not be set in the upper side of the frame when [Tubular] is selected in
[Embroidery hoop] and the frame is displayed on the screen.
1. Select [Hoop Feed Position] from Settings menu.
2. Click the point to feed the hoop.
W1114Q
3. The gray cross appears and shows the hoop feed position.
W1115Q
Hood feed position