Brother BE-1201B-AC-PC - Manual (Page 158)

6-38 BE-0901E-AC-PC• BE-1201B-AC-PC
Chapter 6 Embroidering
Driving shaft
Speeds up the startup of the main shaft. Select this function when sewing thick material.
1. Select [Driving shaft] from Settings menu and check it.
W1738
2. When the item selection is completed, click [OK].
W1739
Activate escape with pause
Sets whether to feed the hoop during temporary stop of the needle bars to change colors. Select
this function when embroidering applique.
1. Select [Activate escape with pause] from Settings menu and check it.
W1740
Click to put a check mark ( )
for speeding up at the loading.
Cannot be set.
For enabling escape, set pause for the
needle bar. Refer to page 6-17
"Setting Ranges".