Buffalo Technology Buffalo AirStation WLAR-L11-L - Manual (Page 49)

WLAR-L11-L Internet Connection Manual 47
Using Windows NT 4.0
1
Refer to the manual supplied with the wireless LAN card and install the LAN card
drivers.
You must also install the ESS-ID setting driver.
2
Start Windows NT 4.0 and log on to your logon name (e.g., Administrator) with
administrator access.
3
Click the Start button and select Settings and Control Panel.
4
Double-click the Network icon.
5
Click the Adapters tab and check if the wireless
LAN card driver is displayed in the “Network
Adapters:” field.
If no wireless LAN card driver is
displayed, refer to the wireless LAN card
manual and install the driver.
6
Click the Protocols tab and make sure the TCP/
IP Protocol is displayed in the “Network Proto-
cols” field.
If the TCP/IP protocol is not dis-
played, refer to the "TCP/IP Protocol Setting
(Windows NT 4.0)"(page 35) in Chapter 6
Preparing AirStation Settings and add the
TCP/IP protocol.
KPVGTPGVDQQM TVR ''''և''''̙ ߆̙ 'ވ'