Buffalo Technology Buffalo AirStation WLAR-L11-L - Manual (Page 35)

WLAR-L11-L Internet Connections Manual 33
Continue to the AirStation Settings section.
7
Select “Use the following IP address” as fol-
lowings.
IP address: 192.168.0.2
Subnet mask: 255.255.255.0
When you enter the address, click the OK but-
ton.
If the LAN network is already con-
figured using the TCP/IP protocol, input
the same network IP address.
Check if the LAN network is already configured using the TCP/IP protocol accord-
ing to the following procedure.
1. Click the Start button, select Programs, Accessories and Command Prompt.
2. C:\> will be displayed on the screen. Enter “IPCONFIG /ALL” and press the Enter
key.
3. If either one of the following is displayed in the IP Address filed, no LAN network is
configured yet.
"0.0.0.0."
"169.254.x.x."
8
Click the OK button.
9
Click the Close button.
KPVGTPGVDQQM TVR ''''և''''̙ ߆̙ 'ވ'