Buffalo Technology Buffalo AirStation WLAR-L11-L - Manual (Page 13)

WLAR-L11-L Internet Connections Manual 11
Adding the TCP/IP Protocol (Windows Me/98/95)
If the TCP/IP Protocol is not present in the setting PC, add the protocol using the following procedure.
This completes the TCP/IP protocol installation.
Continue to the “TCP/IP Protocol Setting” (Windows Me/98/95) section procedure Step 5.
1
Click the Start button, and select Settings, Control Panel, and then Network.
2
Click the Add button.
3
Select Protocol, and click the Add button.
4
In the Manufacturers field, select Microsoft,
and in the Network Protocols field, select
TCP/IP and click the OK button.
5
The TCP/IP protocol is added.
KPVGTPGVDQQM TVR ''''և''''̙ ߆̙ 'ވ'