Buffalo Technology Buffalo AirStation WLAR-L11-L - Manual (Page 19)

WLAR-L11-L Internet Connection Manual 17
This completes the AirStation setting.
To connect to the Internet, you must set the wireless LAN PC. Refer to Chapter 4 Wireless LAN PC Setting
and set it according.
Continue to Chapter 4 Wireless LAN PC Setting.
16
Setting according to the relevant fields.
If assigning IP address from the provider’s DHCP server:
Enter the following and click the Set button.
Ethernet Side IP Address:
Select “Automatic IP Assignment by
DHCP Server”.
Default Gateway Address:
Leave blank.
DNS Address for Automatic IP Assignment:
Leave blank.
If the LAN network has already
been configured, change the “Wireless Side
IP Address” and the “Automatic IP Assign-
ment Setting” as the network settings.
If entering the IP address specified by the provider:
Enter the following values, and click the Set
button.
Ethernet Side Address:
Select Manual Setup, and enter the speci-
fied IP address and net mask.
Default Gateway Address:
Enter the default gateway IP address speci-
fied by the provider.
DNS Address:
Enter the DNS server IP address specified
by the provider.
17
Settings Completed will be displayed. Close the Web browser.
KPVGTPGVDQQM TVR ''''և''''̙ ߆̙ 'ވ'