Buffalo Technology Buffalo AirStation WLAR-L11-L - Manual (Page 39)

WLAR-L11-L Internet Connections Manual 37
Adding the TCP/IP Protocol (Windows NT 4.0)
If the TCP/IP Protocol is not in the setting PC, add the protocol using the following procedure.
This completes the TCP/IP protocol installation.
Continue to the “TCP/IP Protocol Settings” (Windows NT 4.0) section procedure Step 5.
1
Click the Start button, select Settings and Control Panel.
2
Double-click the Network icon.
3
Click the Protocols tab and then click the Add
button.
4
Select the TCP/IP Protocol and click the OK but-
ton.
5
The TCP/IP protocol is added.
KPVGTPGVDQQM TVR ''''և''''̙ ߆̙ 'ވ'