Buffalo Technology Buffalo AirStation WLAR-L11-L - Manual (Page 25)

WLAR-L11-L Internet Connection Manual 23
When the network setting is completed the setting PC should be able to connect to the AirStation. Copy the
setting information (i.e., AirStation information files) to other PCs on the wireless LAN to connect to the
AirStation.
Creating the AirStation Information Files (Setting PC)
Create AirStation information files from the setting PC using the following procedure.
Connecting to the AirStation
1
Format a floppy disk or use a ready-formatted disk. Affix a label reading AirStation
Information Files to the disk.
2
Click the Start button, select MELCO AirStation and AirStation Manager.
3
Select File and then Connect.
When using an Ethernet LAN PC, select Edit, Search AirStation, and then pro-
ceed to Step 6.
4
Enter the following values and click the OK but-
ton.
MAC address :Enter the last six digits of the
AirStation MAC address.
Group name :GROUP (all caps)
The AirStation MAC address is writ-
ten on the AirStation Unit. To check the
MAC address, refer to the "Parts Nomencla-
ture and Functions" section in the Install
Manual.
5
Confirm that the WEP key field is blank and
click the OK button.
If you wish to set encryption using
the WEP key, enter your password in the
WEP key field.
KPVGTPGVDQQM TVR ''''և''''̙ ߆̙ 'ވ'