Buffalo Technology Buffalo AirStation WLAR-L11-L - Manual (Page 37)

WLAR-L11-L Internet Connections Manual 35
This completes the TCP/IP protocol installation.
Continue to the “TCP/IP Protocol Settings” (Windows 2000) section procedure Step 6.
Windows NT 4.0
TCP/IP Protocol Setting (Windows NT 4.0)
Make the TCP/IP protocol on the setting PC using the following procedure.
7
Check if the Internet Protocol (TCP/IP) is
added.
1
Start the PC and log on to your logon name (e.g., Administrator) with administra-
tor access.
2
Click the Start button, select Settings and Control Panel.
3
Double-click the Network icon.
4
Click the Protocols tab and make sure the
TCP/IP Protocol is displayed in the “Network
Protocols” field.
If the TCP/IP Protocol is not displayed, refer to the “Adding TCP/IP Protocol”
(Windows NT 4.0) section and add the TCP/IP protocol.
Continue to next page.
KPVGTPGVDQQM TVR ''''և''''̙ ߆̙ 'ވ'