Using optical media drives, Using optical media drives -2, Loading discs – Toshiba Qosmio F20 (PQF22) User Manual
Page 74
4-2
User’s Manual
Operating Basics
Using optical media drives
The text and illustrations in this section refer primarily to the optional
media drive. However, operation is the same for all other optical media
drives. The full-size drive provides high-performance execution of
CD/DVD-ROM-based programs. You can run either 12 cm (4.72") or
8 cm (3.15") CD/DVDs without an adaptor. An ATAPI interface controller is
used for CD/DVD-ROM operation. When the computer is accessing a
CD/DVD-ROM, an indicator on the drive glows.
If you have a DVD-ROM&CD-R/RW drive, refer also to the
section for precautions on writing to CDs.
If you have a DVD Super Multi drive, refer also to the
section for precautions on writing to CDs.
Loading discs
To load CD/DVDs, follow the steps below.
When the computer’s power is on, press the eject button to open the disc
tray slightly.
Pressing the eject button
1. Grasp the disc tray gently and pull until it is fully opened.
Pulling the disc tray open
Use the WinDVD application to view DVD-Video discs.
Eject button
Disc tray