Toshiba Qosmio F20 (PQF22) - Manual (Page 164)

8-30 User’s Manual
Using the Remote Controller, Front operation button and QosmioPlayer
Replacing the batteries
When the batteries in the Remote Controller reach the end of their life,
the Remote Controller may not operate correctly or work only within a short
distance from your computer. In this instance, you should purchase new
batteries and replace the discharged ones.
1. Open the battery cover on the back side of the Remote Controller.
2. Replace the batteries.
Be sure to place the batteries with their polarities (+ and -) in the correct
position.
Removing the batteries
Close the battery cover.
Close the cover securely until it clicks.
Watching the TV
Activating Media Center for the first time
1. Activate Media Center.
The setup screen appears. Configure settings according to your
environment.
2. When “Optional Setup” screen appears, select [Configure tuners, TV
signal, and Guide] and click [Next].
3. Select the Region to be used in the “Confirm your Region” screen and
click [Next].
4. On the “Automatic TV Signal Setup” screen, select [I will manually
configure my TV signal] and click [Next].
5. On the “Select Your TV Signal” screen, select [Cable or digital cable] or
[Satellite] according to the environment used.
6. On the “Select Your TV Signal Type” screen, select [Analog (NTSC)] or
[Analog Terrestrial (PAL/SECAM)] according to the environment used
and click [Next].
7. On the “Do you Have a Set-top Box?” screen, select [Yes] and click
[Next].
8. Check your settings on the “Prepare for Set-top Box Setup” screen and
click [Next].
9. On the “Select a Working TV Signal” screen, select [Composite Video].
10. Check that the image is displayed correctly and click [Next].
Batteries