Toshiba Magnia Z500 - Manual (Page 95)

HW Diagnostics
Items of HW Diagnostics
93
digits 1-3 :It shows the abbreviation of the test in which the error
occurred.
digits 4-5: It shows the subtest number in which the error
occurred.
digits 6-7: It shows the step number in which the error occurred.
(Depending on the test, Digits 6-7 are not always
displayed.)
PASS
It shows the pass count where the error occurred.
STS
It shows the error status.
The meaning of the error status depends on the test item.
NOTE: For [06. SCSI HDD TEST], the first digit of STS
represents the SCSI ID.
For [13. IDE HDD TEST], the first digit of STS represents the
Drive Number.
ADDR
It shows the address where the error occurred.
WD
It shows the write-data at the occurrence of the error.
MEMORY TEST RAM NPX TEST NPX
KEYBOARD TEST KBD CACHE MEMORY TEST CAH
DISPLAY TEST CRT SCSI TEST SCS
FLOPPY DISK TEST FDD CD-ROM TEST CDR
IDE HDD TEST IDE SAF-TE TEST SAF
SCSI HDD TEST HDD BMC TEST BMC