Toshiba Magnia Z500 - Manual (Page 92)

HW Diagnostics
Items of HW Diagnostics 90
The test detects the SAF-TE controller first and shows the
connecting destination of the detected SAF-TE controller (host
number, SCSI ID, and channel number) with model name.
After detecting the SAF-TE controller, the following message
appears:
When the message above appears, check that all LEDs of the
hard disk drives light in orange. Then press key.
When the message above appears, check that all LEDs of the
hard disk drives are flashing orange. Then press key.
When the message above appears, check that all LEDs of the
hard disk drives light in orange. Then press key.
When the message above appears, check that all LEDs of the
hard disk drives are flashing orange. Then press key.
When the message above appears, check that all LEDs of the
hard disk drives turn off. Then press key.
SAF-TE TEST (SAF) Error log
--HT-ID----CH--VENDOR-PRODUCT-------FAN-PS--SLOT XX XX
XX XXXXX XXXX XX XX XX
SAF-TE LED Steady ON (Faulty Flag) Hit any key
SAF-TE LED Blinking (Rebuilding Flag) Hit any key
SAF-TE LED Steady ON (Rebuild Interrupted) Hit any key
SAF-TE LED Blinking (Rebuilding Flag) Hit any key
SAF-TE LED Reset (No Error Flag) Hit any key
Status Error name Meaning
01 SAF-TE TEST ERROR SAF-TE controller has not been detected.