The error that occurs by incorrect operation – Toshiba Magnia Z500 User Manual

Page 115

Text mode
Original mode

Troubleshooting
Troubleshooting Information

114

Unable to continue the installation because the system does
not recognize a Hard Disk Drive or Logical Drive.

The error that occurs by incorrect operation

Point:

During SST starting.

Reason:

The HDD is not found physically.

Action:

1. Check that the HDD(s) are operating
correctly, by using HW diagnostic program
etc.
2. Check that the HDD(s) are connected
correctly.
3. Check that the SCSI cable is connected
correctly.
4. Check that the BIOS configuration of SCSI
and RAID is set up correctly.

Point:

During SST starting.

Action:

1. Return to the main menu by pressing "S"
key at the time of re-starting.
2. Perform the installation from the beginning
again.