Toshiba Magnia Z500 - Manual (Page 85)

HW Diagnostics
Items of HW Diagnostics
83
NOTE: Replace the diskette for the test with the HW
Diagnostics Program diskette after testing.
[05. PRINTER TEST]
To test the operation of the printer port.
[01. Print Ripple pattern]
If you select [05. PRINTER TEST] - [01. Print Ripple pattern],
the following message appears. (On MAGNIA Z500, the
printer port is not supported.):
[06. SCSI HDD TEST]
This test checks the HDD functions connected to the SCSI-Bus
through the ASPI driver software. Before running the test, you
must designate the items for testing. (Even if the SCSI HDD does
not exist on your computer, this test can be executed, however
nothing is tested.)
HOST ID NUMBER
This option sets the target host adapter number. When you choose
"ALL", the subtest tests all disks connected to the server, and the
next options, SCSI ID NUMBER and CHANNEL NUMBER
will be ignored.
SCSI ID NUMBER
This option sets the SCSI ID to test. You can specify just one ID to
test except ID:7.
CHANNEL NUMBER
If the server has multiple SCSI channels, this option sets the
channel number to test.
PRINTER NOT FOUND
HIT ANY KEY