Toshiba Magnia Z500 - Manual (Page 32)

Setup
Windows® 2000 Quick Installation
29
Network Protocol Setting -2
After completing the settings on the DNS/WINS Setting -1 screen
(if you have specified TCP/IP as network protocol on the Network
Protocol Setting -1 screen) or the Network Protocol Setting -1
screen (if you have not specified the TCP/IP as network protocol
on the Network Protocol Setting -1 screen), the Network Protocol
Setting -2 screen appears. Use this screen to specify the network
communication protocol for Network Adapter(LAN2).
Network Protocol Setting -2 screen
Select the communication protocol for Network Adapter(LAN2),
then click [Next].
TCP/IP Protocol
Transmission control protocol
Internet protocol
NetBEUI Protocol
NetBIOS expansion user interface
NOTE: If you select "TCP/IP Protocol", the SNMP service will
be automatically installed.