Toshiba Magnia Z500 - Manual (Page 76)

HW Diagnostics
Items of HW Diagnostics 74
Diagnostics TEST - TEST PARAMETER
[01.Go to Test]
Start the test. If you need to stop the test program, press +
.
[02.Test Loop]
Selecting "YES" increments the pass counter each time the test
cycle ends, and restarts the test cycle.
Selecting "NO" returns the subtest menu to the main menu after
the test is completed.
[03.Error Stop]
Selecting "YES" stops the test program when an error is detected.
Selecting "NO" keeps the test running even if an error is detected.
Running Test (02.RUNNING TEST)
The following test parameter appears when you select "02
RUNNING TEST".
(To return to the Main Menu, select "99" or "Esc".)
Running TEST - TEST PARAMETER