Toshiba Magnia Z500 - Manual (Page 73)

HW Diagnostics
About HW Diagnostics
71
About HW Diagnostics
HW Diagnostics starts a diagnostics test of the server's hardware
devices. You can select a single device or a combination of devices
to test.
Use the HW Diagnostics Program to check:
! Whether the server operates normally.
! For anything abnormal or any failure while the server is in use.
! Whether or not optional devices are working normally.
Starting the HW Diagnostics Program
Starting up with the diskette
NOTE: If you have not create the HW Diagnostics Program
diskette, create it from [Utilities] - [Create Floppy Disks].
1 Make sure that the monitor, keyboard,floppy disk drive, mouse
and all peripherals are correctly connected.
2 Set the HW Diagnostics Program diskette. (Set the diskette
writable.)
3 Turn on the power of the server.
HW Diagnostics Program starts.
Items of HW Diagnostics
When any key is pressed on the initial screen of the Toshiba HW
Diagnostics Program, the main HW Diagnostics Program menu
appears: