Bmc test, Ide hdd test – Toshiba Magnia Z500 User Manual

Page 93

HW Diagnostics

Items of HW Diagnostics

[12. BMC TEST]

To test the BMC functions and the LED display functions.

[01. Sensor test]

The sensor test for each controller is performed with the results
displayed.

[02. FrontPanel test]

Verifies the functions of LED. Check that:

LED Test:

Please check that the Fault LED is ORANGE.

OK (Y) / FAILED (N)

Please check that the ASD LED is ORANGE.

OK (Y) / FAILED (N)

Please check that the ASD LED is GREEN.

OK (Y) / FAILED (N)

[13. IDE HDD TEST]

Tests the IDE HDD devices. (Even if the IDE HDD does not exist
on your computer, this test can be executed, however nothing is
tested.)

[01. Sequential address read]

This subtest is a sequential reading of all the blocks on the
HDD, starting at block 0. (TBD)

[02. Connection]

This subtest reads the logical sector at the end of the HDD, and
then recognizes if the drive is connected or not.

IDE HDD TEST (IDE)

Status

Error name

Meaning

IDE HDD TEST ERROR

Failed to test the IDE HDD.